Kitchen Knife Cutting Techniques: Rocking, Push Cuts, Pull Cuts and Chopping
Kitchen-knife cutting techniques explained
Rocking cuts, push cuts, pull cuts and chopping use different movements. Match the technique to the blade shape and ingredient. Start slowly: control, a stable cutting surface and keeping fingers clear matter more than speed.
Holding a knife: the pinch grip
On many chef's knives, you can stabilise the blade just in front of the handle with your thumb and index finger while your remaining fingers hold the handle. Keep your fingers on the blade's sides and away from the cutting edge. Hold securely without excessive tension, using a grip suitable for the specific knife.
The claw grip: controlling the ingredient
Use your other hand to steady the food. Curl the fingertips inward so they stay behind the knuckles, with the thumb tucked safely away from the cutting path. The knuckles can help orient the side of the blade, but do not press the edge against them. Move the guiding hand back gradually as you cut. Practise slowly with an ingredient that rests securely, such as a halved cucumber or onion.
The rocking cut
Keep the front of the blade or tip close to the board while lifting and lowering the rear section in a controlled rocking movement through the ingredient. This can suit herbs, onions and vegetables. A chef's knife with a sufficiently curved edge often works well; very straight edges do not rock as naturally. Avoid sideways twisting against the board.
The push cut
Guide the knife forward and downward through the ingredient, then lift and reposition it for the next cut. Unlike rocking, the knife does not continually pivot over its tip. This can suit vegetables such as cucumber, carrots, peppers and courgettes, as well as suitable boneless ingredients. A Santoku with a relatively flat edge often suits this movement.
The pull cut
Draw the cutting edge through the ingredient in a long, controlled movement, using the blade length rather than excessive downward pressure. This is useful for suitable meat, fish and delicate foods. A long Sashimi or Yanagiba knife can support a long drawing cut rather than repeated short sawing movements. Follow the intended use of the specific knife.
Chopping
Lift the blade and guide it down through suitable vegetables or herbs in a controlled movement. The tip does not remain on the board throughout. A broad kitchen cleaver can suit these tasks, but it is not automatically a bone cleaver. Hard bones require a tool explicitly designed for them. Do not use fine edges for frozen food or levering.
Which technique suits which knife?
| Technique | Typical blade | Typical use |
|---|---|---|
| Rocking | Curved chef's knife | Herbs, onions and vegetables |
| Push cut | Santoku or relatively flat edge | Suitable vegetables, herbs and boneless meat |
| Pull cut | Long slicing, Sashimi or Yanagiba knife | Fish, boneless meat and fine slices |
| Chopping | Suitable cleaver | Vegetables and herbs |
These are guidelines, not rigid rules. Blade geometry, sharpness, the ingredient and your own control all matter.
Common mistakes
- Too much force: if cutting needs excessive pressure, stop and check sharpness, the ingredient and knife choice.
- Rushed movements: use a steady motion appropriate to the blade instead of trying to cut quickly.
- Exposed fingertips: keep them out of the cutting path and steady the ingredient carefully.
- Unsuitable surfaces: avoid very hard cutting surfaces such as glass, stone or ceramic; use a suitable stable board.
- Twisting the edge: avoid sideways pressure and levering.
- Continuing with a blunt blade: sharpen appropriately when cutting performance declines.
Maintaining the edge
Use a suitable chopping board, clean the knife by hand and dry it thoroughly. When needed, choose an appropriate sharpening stone or sharpening tool and follow its instructions and the knife's edge geometry. Read our guide to cleaning, sharpening and safe storage.
Frequently asked questions
Which technique should a beginner learn?
Start with slow, controlled movements. A push cut can be a practical starting point with a suitable relatively flat blade. Concentrate on a stable ingredient, grip and control before adding speed or other techniques.
What is the difference between rocking and push cuts?
Rocking keeps the front of the blade close to the board while the rear moves up and down. A push cut moves forward and down, then lifts and resets the blade.
Can I chop bones with a cleaver?
Only if the exact tool is explicitly designed for that purpose. Many broad Chinese-style cleavers are meant for vegetables and boneless ingredients.
Find a knife for your technique
A suitable blade shape helps you cut with control. Read which kitchen knife suits you, then compare kitchen knives. Choose for your ingredients and preferred movement rather than speed or appearance alone.